LEA Professional Connect 702 2-Channel 700W Power Amplifier

LEA Professional Connect 702 2-Channel 700W Power Amplifier

The CONNECTSERIES 702 is a 2-channel amplifier with 700watts per channel. As part of the Network CONNECTSERIES, the world’s firstInternet of Things- (IoT) enabled professional-grade amplifiers, it isperfectly suited for small to medium-scale installations. The 702 featuresdirect HiZ (70V or 100V) or LoZ selectable by channel. With three ways toconnect, you can engage the built-in Wi-Fi access point, connect to the venue’sWi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 orCat6 cable.

Then there’s the Cloud…Network CONNECTSERIES is the firstprofessional amplifier family to feature Cloud connectivity. Harness the powerof the Cloud for remote control, monitoring, notifications, and more from anyof your personal devices. Just connect your amp to a network and startcommanding your systems.

The Network CONNECTSERIES also features analog inputs andexternal I/O control for remote on/off and fault monitoring.

Key Features

• 3 WAYS TO CONNECT: Built-in Wi-Fi Access Point, ExistingWi-Fi Network, Local Area Network
• Works on any web browser on any device with no softwaredownloads
• Remote control and monitoring from anywhere in the world -no VPN needed.
• 70V or 100V selectable per channel
• Double the power any any single channel without sacrificingother amp channels
• Fully routable via input matrix in Web UI or Cloud platform
• For Remote ON/OFF and Fault Monitoring

Technical Specifications

AUDIO
INPUTS
Analog: 2 Balanced Inputs with user selectable 26 dB and 34dB input sensitivity
THD+N
0.1% (20Hz to 20kHz)
FREQUENCY RESPONSE
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @20kHz at 2Ω
SIGNAL TO NOISE LEVEL
105dB (20Hz to 20kHz referenced to 8Ω)
CROSSTALK
70dB (20Hz to 20kHz)
AMPLIFIER OUTPUT CLASSIFICATION
Class D with Proprietary Smart Power Bridge Technologyallowing bridged output functionality without sacrificing an amplifier channel
DSP
DSP ARCHITECTURE
Analog Devices Sigma 96kHz DSP Processor with 32-bit Corewith Sample Rate Converters
INPUT MATRIX
Routable matrix; any input to any output with primary andsecondary input priority
CROSSOVERS
Up to 48 dB/Octave IIR Filters (Linkwitz Riley andButterworth)
PARAMETRIC EQ
8 Band Parametric EQ per channel
OUTPUT DELAY
100ms per channel
OUTPUT PROTECTION
DC, VHF, and AC Mains Protection, Overtemp and CurrentLimiter, fan fault detection
USER ADJUSTABLE LIMITING
Peak Voltage and RMS Voltage
LOAD MONITORING
Realtime Load Monitoring and Pilot Tone Detection fromInternal or External Sources
CONTROL, MONITORING, NETWORKING
USER INTERFACE
Web Browser User Interface, 3rd Party API control, or CLOUDcontrol
EXTERNAL I/O
External I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health
OPERATION
AC MAINS
100VAC – 240VAC +/- 15% 50Hz or 60Hz
POWER SUPPLY
Universal Switch Mode Power Supply with Power FactorCorrection
PHYSICAL SPEC
DIMENSIONS (L X W X H)
Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mmx 482mm x 1U)
Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
WEIGHT
10lbs / 3.4kg | Shipping: 17.4lbs / 7.9kg
COOLING
Front to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m