FBT JMaxX 114A 14-Inch Processed 2-Way Active Loudspeaker
The new FBT JMaxX 114A combines ease of use and versatilityfor many portable or installed sound applications: musicians, DJs, AVLcontractors, rental sound reinforcement, corporate events, houses of worship,bars and clubs.
With its eye-catching gas-injected forms designed tovirtually eliminate undesired enclosure resonance and reinforce strong lowfrequency performance, the 14-inch JMaxX 114A is equipped with FBT’s latest 90°x 60° HF horn design which delivers improved projection, accuracy, anddispersion of the mid and high frequencies.
Providing a myriad of possibilities for bands, DJs and soloartists, as well as for permanent installations, the JMaxX 114A is actuallyfour loudspeakers in one. Derived from a decade of experience of portable soundreinforcement, the carefully tailored equalization presets offer highlyintelligible response for vocals and floor monitoring; slightly boostedresponse in lounge bar applications; punchy and forward sound for DJs and nightvenues; and a general-purpose EQ setting that mirrors the original and familiarFBTMaxX voicing.
The JMaxX 114 A features FBT’s latest generation lightweight700W + 200W Class D power amplifier with universal switch mode power supply,delivering abundant power and headroom to reproduce even the largest transientswithout distortion.
And a unique 14 Inch Low frequency driver. The 14” Driverfits inside a cabinet the size of a 12” Cabinet yet performs as good as aconventional 15”.
This unique speaker.
The result is an amazingly compact speaker with all thepower and clarity of a much larger speaker and weighing Just 14Kg this Speakeris a dream to transport.
XLR inputs and outputs, volume control, the EQ presets andfilters, and ground lift switch are all conveniently located on a clearly laidout rear panel, making loudspeaker setup and operation intuitive andconsistently repeatable.
The JMaxX versatility is further underscored by the manymounting and fixing options that the ergonomically styled cabinets provide.Mounting in fixed installations is made easy using the M10 suspension points orwall bracket flange plates, while portable use is facilitated by the built-in35mm pole mount socket.
There’s no need for separate stage monitors, as JMaxX’scabinet profiles are designed with 14°, 40°, and 55° wedge angles, and whenused with the specific floor monitoring EQ presets, will ensure that performershear themselves with ultimate clarity.
Key Features
- Configuration: 2-way
- Built-in amplifier LF/HF: 700/200 W RMS
- Built-in amplifier peak LF/HF: 1400/400 W
- Frequency response: 45Hz – 20KHz -6dB
- Low Frequency woofer: 14 – 2.5 coil inch
- High Frequency driver: 1 – 1.4 coil inch
Technical Specifications
Configuration
2 Way
Frequency response
45Hz – 20kHz
Low frequency woofer
14” (2.5” VC)
High frequency driver
1” (1.4” VC)
Maximum SPL cont/peak
132 dB
Dispersion
90 x 60
Input connector
XLR + 6.3mm Jack
Net Weight
14kg
Built-in amplifier LF/HF
700w/200w
Power cord
5m IEC
