ADJ Par Z100 3K2 100W 3000K Warm White COB LED Fixture:A Modern Twist on Classic Par Can Design
The ADJ Lighting Par Z100 3K2 combines the traditionalaesthetic of a par can with the modern technology of LED lights. The blackcasing is reminiscent of a standard par can, but with an LED light source thatproduces a similar output to a 1000W sealed beam par, without producing excessheat.
This Par Z100 3K2 is powered by a 100-Watt, 3000K Warm WhiteC.O.B. LED engine, with a CRI greater than 90, providing an accuratereplication of the output from a classic lamp. The fixture also features fivemanual zoom beam angles, allowing designers to choose from a range of 9° to30°. Additionally, the fixture comes with a traditional par can gel frame,which allows designers to add diffusion filters for further control over thefixture’s output.
With a 4-button DMX OLED display menu, adjustable stroberates, 6 dim modes, and electronic dimming from 1-100%, the Par Z100 3K2 is aversatile option for lighting designers. The fixture is also RDM and RDM Netcompatible, with locking power In/Out sockets for daisy-chaining power, as wellas 5-pin DMX data In/Out sockets located on the back.
Key Features
- The ADJ Lighting Par Z100 3K2 is a LED lighting fixture thatcombines the classic par look with modern LED technology.
- It has the appearance of a regular black Par can, but ithouses a powerful LED light source inside.
- The output of the PAR Z100 3K2 is comparable to a 1000Wsealed beam Par, but it generates much less heat.
- This makes it an ideal choice for illuminating stageswithout causing discomfort to performers.
- The rear panel of the fixture features a 4-button DMX menudisplay for easy control.
- It also has an OLED display for clear visibility of settingsand information.
- The beam angle of the PAR Z100 3K2 can be manually adjustedusing an adjustable latch.
- It comes with a gel frame for diffusion filters, althoughthe diffusion filters themselves are sold separately.
- The strobe rate of the fixture can be adjusted from 0.6Hz to7.5Hz.
- It has a high refresh rate of 1.2KHz and offers electronicdimming from 0 to 100% in 6 different modes.
- The PAR Z100 3K2 is equipped with a 100 Watt, 3000k WarmWhite C.O.B. LED (Chip On Board) with a rated life expectancy of 50,000 hours.
Technical Specifications
Optical
100 Watt, 3000k Warm White C.O.B. LED (Chip On Board)
Life expectancy
rated at 50,000 hrs.
Manual Zoom
9°, 15°, 20°, 25° or 30°
Zoom Ration
3.3:1
Photometrics
5885 Lux (Zoomed In to 9° @ 5 meters)
767 Lux (Zoomed Out to 25° @ 5 meters)
CRI
>90
Connection
DMX
5-pin DMX In/Out
With Wired Digital Communication Network
Locking power In/Out connections
Control
DMX-512
2 DMX control modes
(3 & 4 Ch. modes)
RDM and RDM Net Compatible
Primary/Secondary, stand-alone mode
On-board manual control mode
Features
4-button DMX menu display on rear panel
OLED display
Adjustable latch to manually change beam angle
Includes gel frame for diffusion filters (Diffusion filtersold separately)
Strobe Rate
0.6Hz to 7.5Hz
Refresh Rate
1.2KHz
Electronic Dimming
0 – 100%
6 Dim Modes
Electrical
Power Draw Total (@ Full On)
115W
Power Consumption
0.964A @ 120V/60Hz; 0.5A @ 220V/50Hz
Multi-voltage operation
AC 100-240V, 50/60Hz
Daisy chain
15 fixtures @ 120V; 25 fixtures @ 230V
Fuse protected
3A/250V
Ambient Temperature Range (For Use)
-4 Degrees ~ 113 Degrees F (-20 Degrees C ~ 45 Degrees C)
Storage Temperature Range
-22 Degrees ~ 113 Degrees F (-30 Degrees C ~ 45 Degrees C)
Dimensions / Weight
Dimensions (LxWxH)
19.25” x 10.94” x 10.68” / 489 x 277.7 x 271.1mm
Weight
7.94lbs. / 3.6kg.
IP Rating / Approvals
IP20
CE & FCC
ETL PENDING
